Pumps for petroleum products SAMARAPROMKOMPLEKT SCL, BG, NDV, etc.

Pure liquids without mechanical impurities: water, gasoline, kerosene, diesel fuel, alcohol and other neutral liquids with a viscosity of no more than 2x10 ^m2 / s and a temperature from 233K (-40 C) to 323K (+50 C) and a density of no more than 1000 kg / ^m2.

• ICL, ICN, SCL. Technical specifications.

Non-aggressive liquids that have a lubricating ability and do not have abrasive impurities. These pumps are three-screw. The technical characteristics of the three-screw pumps are given when working on mineral oil with a viscosity of 0.75 ^cm2 / s (10oVU).

• A13B. Technical specifications.

Mineral oil with kinematic viscosity from 17 to 400 ^mm2/s (cSt), temperature from 283 to 328 K (from 10 to 55 C). These gear pumps are designed for pumping mineral oil under nominal pressure constant in magnitude and direction of flow into the lubrication systems of machine tools and other stationary machines. It is allowed to use pumps and pumping units in hydraulic systems.

• BG, G. Technical characteristics.

The pumps are designed for pumping a mixture of water and petroleum products from underground drainage tanks with a temperature from -15 to +80 C, a density of up to 1000 kg/^m3.

• NV. Technical specifications.

Petroleum products: crude oil, automobile and aviation gasoline, diesel fuel with a temperature from 278 to 318 K (from +5 to +45 C). These pumps are two-way horizontal single-stage inlet pumps.

• NDV and VAT. Technical specifications.

Petroleum products with a density of up to 1 t/^m3 and a viscosity of up to 0.01 ^cm2/s. The temperature of the pumped liquid is from 273 to 353 K (from 0 to +80 C) and from 273 to 473 K (from 0 to +200 C). Pumps are used in oil refining, petrochemical and other industries.

• NC. Technical specifications.

Jet engine fuel, automobile gasoline, aviation gasoline and diesel fuel with temperatures from 258 to 323 K (from -15 to +50 C) and water. These pumps are two-way horizontal single-stage inlet pumps.

• TSN. Technical specifications.

Petroleum products, light-setting and other liquids with lubricating ability, without mechanical impurities and non-corrosive working bodies of the pump. The viscosity of the pumped liquid is from 0.2 to 100 ^cm2 / s, with a temperature up to 343 K (70 C). These pumps are gear pumps with internal supports on the legs.

• Sh, NSH, NMSH. Technical specifications.

Designed for pumping petroleum products with a temperature of up to 100 C in the conditions of oil depots.

• ENP. Technical specifications.

Questionnaire